xDEPOT xRESIN Model – 3D Printing Resin

Specifications of Washable 3D Resin:

• Low odor, minimal nuisance
• Water washable
• Exceptional resolution
• Manufactured in Germany

Waser Washable Resin, designed for LCD Modeling using Photopolymers (Synthetic Resin), is optimized to perform effectively in low light conditions typical of LCD displays. Its efficiency outperforms comparable resins available in the market, making it a preferred choice for LCD displays and suitable for DLP or SLA printers.

Resin Characteristics:

• Wavelength range: 385 to 405 nm
• Shore Hardness (D): 84
• Viscosity at 25°C: 200 MPa/s
• Liquid density: 1.20/cm³
• Bending strength: 58 MPa
• Extensibility: 36 MPa
• Elongation fracture: 8.00%
• Young’s Modulus: 2200 MPa
• Shelf life: 18 months

Recommended Print Settings:

• Exposure time for ground layers (4-12 layers) in seconds: 25-40s
• Exposure time for model layers in seconds: 0.8-6s

Storage Instructions: Protect the resin from light and store it at room temperature. Extended exposure to sunlight can cause the photosensitive resin to harden. Ideal storage conditions range from 15 to 35°C. Lower temperatures will increase the resin’s viscosity. Ensure sealed storage to prevent the adverse effects of excess dust or moisture on print quality.

Usage Guidelines:

• Thoroughly shake the resin before use.
• Avoid using the resin in areas with abundant sunlight.
• Do not rinse printed objects under running tap water.
• Responsible disposal of chemicals is essential, preventing their release into the environment.
• When storing unused resin, use containers filled with water. Any leftover resin should be returned to the original resin bottle. Avoid leaving resin in the tub for extended periods without proper sealing, as contamination can affect future prints unless stored in airtight containers or sealed with plastic wrap.

Post-Processing Steps:

• Remove the model using a metal scraper.
• Submerge the model in a cleaning box filled with water to wash off excess resins within 2 to 3 minutes.
• Repeat the cleaning process in another box within 2 to 3 minutes to ensure all excess resins are removed.
• Finish the cleaning by placing the model in a water-filled ultrasonic device for a final cleaning, taking 1 to 2 minutes.
• After cleaning, dry the model with a dust-free cloth or an air gun. Optionally, you can harden the model in a hardening box at 35°C.

Compatibility:

• Compatible with xPRINT and all open printers.

Manufacturer: xDEPOT

Instructions For Use
Safety Data Sheet